We use our own and third-party cookies to improve browsing and provide content of interest.

In continuing we understand that you accept our Cookies Policy. You can modify the cookies storage options in your browser. Learn more

I understand

Featured

REC4. The best thing that can happen is nothing at all

on .

Have you suffered a financial loss due to a trip of your residual current protection?

When you're not there, a trip of a residual current protection device can cause a significant financial loss

The function of an RCCB is to protect both people and installations anytime a leakage current is present. An RCCB gives you the peace of mind that comes from knowing that you are properly protected when inside your home or work place.

However, an RCCB trip is not just caused by the presence of permanent leaks in the installation; it can also be caused by temporary currents resulting from phenomena as commonplace as thunderstorms.

Because of this, it's important to pay attention to the effects that an RCCB trip can have, especially when you're not there. This is because without an automatic reset, a trip will result in financial losses, in addition to affecting other systems in your installation.

 REC4

 

Ask us any question about this product.

REC4. The solution

The REC4 is an RCCB designed for all those installations where service continuity is essential. Available in 2 and 4 pole models, both feature a smart reclosing motor, which will make 3 attempts to safely and automatically reset the RCCB.

REC4. The solution

How is the REC4 installed?

How can an RCCB trip affect me?

Let's consider your primary residence: a trip from an RCCB can cause the food in your fridge to spoil, faults in your home information and automation system, or the failure of irrigation or pool cleaning systems in homes. The same thing can happen in your second home, but worse, since you might not be there for days or weeks, resulting in greater damage due to the time it takes before the RCCB is reset.

In restaurants or supermarkets, the problems caused by a protection trip are aggravated by the large costs associated with wasted food, not to mention the very likely financial impact due to lost revenue, as well as the cost associated with replacing the spoiled food in both businesses.

How does it work?

Timed or insulation reclosing system

Once a ground leak is detected, the device will try to directly reclose up to 3 times after a waiting period has elapsed (3, 20 and 180 seconds). It also measures the insulation, meaning it will only reclose once the fault that caused the original trip has cleared.

  • Minimises financial losses due to ground current trips in the installation.
  • Recloses the device once the fault that caused the trip clears.
  • High-sensitivity insulation readings to guarantee protection when reclosing.

Can I override the reclosing?

The REC4 features a reclosing override system by means of a mechanism on the front that is coupled to the ON/OFF switch. The device has a locking system to control operation in manual or automatic mode (reclosing enabled). It is also sealable, to make sure that no unauthorised individuals can tamper with its operation.

Can I override the reclosing?

Completely secure

  • Avoids reclosing if in direct contact with a person.
  • Manually overrides the reclosing via its sealable safety system.
  • Continuously indicates the device status via LEDs on the front.
  • 30 mA sensitivity to protect people.

Easy installation

Use it in installations with no space available in the electrical panel, only 3 DIN rail modules. You can replace your current system using the same space, with no additional wiring needed to install the self-reclosing system.

 

Easy installation

Maximum continuity, minimum space

Maximum continuity, minimum space

REC4. The best thing that can happen is nothing at all.

You will go back to the supermarket and all the food will still be fresh. Install REC4
 

Applications

REC4 protects all electrical installations requiring full electrical service continuity in the event of unforeseen incidents that cause the RCCB to trip for reasons other than electrical insulation.

Houses and second homes; refrigerators, swimming pools, gardens, alarms, garage doors, etc.
Houses and second homes; refrigerators, swimming pools, gardens, alarms, garage doors, etc.

Services Sector; air conditioning, cold storage rooms, UPS's, etc.
Services Sector; air conditioning, cold storage rooms, UPS's, etc.

Industrial sectors, control of critical production processes, etc.
Industrial sectors, control of critical production processes, etc.

 REC4

 

Ask us any question about this product.

Discover the benefits of installing the new Line-TCPRS1 wireless converter with Wi-Fi and Ethernet

on .

We are in a time when the world is more digitised than ever, and the electricity sector is not immune from this development since the vast majority of electrical installations use measurement devices with communications capabilities. The goal is to be able to send all the information to management software in order to process the data received so as to closely track everything that takes place in each of the installations. As well as to apply the appropriate improvements, especially in the area of energy efficiency.
The market trend is to use increasingly more wireless devices, and thus to avoid having to wire communications, making the installation much faster and more convenient. At CIRCUTOR, we are experts in this type of installation with communications, which is why we are introducing the new line-TCPRS1 communications gateway to the market, which allows converting RS-232 or RS-485 (ModbusRTU) to Wi-Fi and/or Ethernet (ModbusTCP).

Line-TCPRS1: wireless converter with Wi-Fi and Ethernet

Communication via Ethernet

This device features the communications of the line measurement system, i.e. the lateral bus through which all the information is sent without the need for wiring, and it also has the external terminal to be able to connect all the other communications devices in the installation at the same time.

 Communication via Ethernet 

Modbus RTU conversion to Modbus TCP via Ethernet

 

Communication via Wi-Fi

If, on top of this, you consider that the device offers Wi-Fi for sending the information to the management software, it makes it the perfect solution for those installations where routing communication wires is complicated.

 Communication via Wi-Fi 

Modbus RTU conversion to Modbus TCP via Wi-Fi

 

DHCP enabled by default

Another feature that makes it a very convenient device for users is that it is set up by default with DHCP enabled, so when the Ethernet cable is connected to the router, it will automatically be assigned an IP address.

 DHCP enabled by default 

Ethernet with DHCP enabled for automatic LAN connection

 

MyConfig App

Continuing with the theme of making our customers' work easier, CIRCUTOR has developed a mobile app (MyConfig) that can be used to set up communications between the line-TCPRS1 and other devices. This app can be downloaded free of charge from the Play Store for Android devices.

 MyConfig App

Automatic configuration via Bluetooth with the MyConfig app

As if that weren't enough, the line-TCPRS1 has its own web page where you can set up all the device's parameters quickly and conveniently.
In order to make the line-TCPRS1 device usable in any type of installation, it has been designed to accept input power from 80-264 VAC, 100-300 VDC and 50-60 Hz. Finally, this gateway can communicate using the following protocols: Modbus TCP, TCP y UDP

 

Find out how easy it is to install the Line-TCPRS1 communications gateway

 

 

Line-TCPRS1 is very easy to set up, minimising the installation and programming time when starting up your measuring and control devices.

 


Find out more about Line-TCPRS1:

 

Access the technical sheet of the Line-TCPRS1:   Consult the catalog of the Line range:
     
 

 


Circutor MyCatalog. Help us build an efficient future.

on .

As part of our #thefutureisefficiency campaign, at CIRCUTOR we are continuing to carry out small actions to help create the efficient future that we and our environment need. With this objective in mind, we have digitised all our product information in order to bring us even closer to you.

We have a clear objective: to work together with our partners to improve the efficiency of our companies and reduce the impact of the carbon footprint, always connected.

For this reason, we are launching CIRCUTOR MyCatalog, the new mobile app with which you can easily find all the information about our products and solutions, get updates about our new launches and always keep yourself up to date. Find the products that best suit your needs and create lists of your favourites to get instant access to all their documentation and newest videos.

Find any product with ease

You can use MyCatalog to find the product that best suits your needs, either searching by keyword, product name or reference number, or directly by browsing from the product family tree.

Find any product with ease

Search by:

  • Product Name
  • Reference number
  • Keyword
  • Product family

Discover our latest products

Discover all our new products at a glance. Access all product documentation and videos instantly in a single step.

Discover our latest products

List of latest releases

Find exactly what you need

Use filters to narrow your search for products with the features you really need saving time in your selection. Mark the features that best suit your needs and find all the available solutions.

Apply advanced filters

Apply advanced filters

All documentation always up to date

Download information specific to each product, with documents that are always up to date. Use it during the start-up of our products without the need for printouts. You will also play videos about our solutions to make sure you don't miss any details about their features.

Review product information

Review product information

Make the most of your time

Save the products you use most in your Favourites menu and access all their documentation faster, whenever you need it. Save time by consulting your most used products whenever you need to review their specifications and documentation.

Create lists with your most-used products

Create lists with your most-used products.

Available for both iOS and Android, we invite you to free download the app and to join us in our efforts to reduce our carbon footprint, minimising the use of paper.

Circutor MyCatalog  

Circutor MyCatalog

Get it on Google Play

Download on the App Store

At CIRCUTOR, we are counting on you to build a more efficient future, together.

Avoid inductive and capacitive reactive penalties by installing the new SVGm

on .

Nowadays, utilities are penalizing those installations with inductive reactive energy consumption. The trend, in most countries, is to demand cosines of phi close to 1, even penalizing those installations that consume capacitive reactive energy.
For this reason we present our Static Var Generator SVGm. Solution with reduced dimensions to prevent your installation from exceeding the consumption limits of both inductive and capacitive reactive energy.

Discover the key aspects to avoid reactive penalties with the greatest efficiency.

 

 

SVGm compensates the reactive energy in your installation, helping you to save in two ways.

Ø penalties in any type of installation

Ø penalties in any type of installation

Eliminates the monthly penalty fee applied by the utility company, both for reactive inductive and capacitive energy.

 

Optimize your installation

Optimize your installation

Reactive energy compensation reduces the circulation of current through the installation's cables, preventing overheating and tripping of the protections. It also optimizes the performance of your installation's power transformer.

SVGm compensates the reactive energy in your installation

Discover all the benefits of installing the SVGm

 

Avoid any kind of penalty for reactive energy

  Avoid any kind of penalty for reactive energy  

 

Accurate

It allows a target cos ϕ to be set, ranging from 0.7 inductive to 0.7 capacitive. The device compensates the exact amount of reactive current to achieve the set target value.

It has individual phase compensation to adjust the total cos ϕ, avoiding any kind of reactive consumption.

 

Avoid any kind of penalty for reactive energy

 

Adaptable to any type of installation

  Adaptable to any type of installation, no matter how fast the loads fluctuate  

 

Fast

SVGm has the most advanced technology in switching elements. With a response time of less than 20ms.

The device is prepared to instantly compensate networks with high consumption fluctuations.

 

Incorporates IGBT technology

 

It is not affected by harmonics present in your installation.

  It is not affected by harmonics present in your installation.  

 

Immune

SVGm uses power electronics to compensate reactive energy. As it has no passive elements, the device can be installed in any type of network with a high presence of harmonic currents without affecting its performance.

 

It is not affected by harmonics present in your installation

 

Minimal maintenance required

  Minimal maintenance required  

 

Efficient

The operation of SVGm does not require mechanical components for its operation, avoiding the need for maintenance and replacement of its components.

Unlike conventional compensation devices via contactor, no transients are produced because the technology is not based on the connection of capacitors.

 

Minimal maintenance required

 

Easy commissioning

  Easy commissioning  

 

Easy start-up

In just 3 steps the device starts to compensate. Initial set-up can be performed either on-site, via the touch screen, or remotely via communications.

Display of compensation status and electrical parameter readings on screen, with colour diagrams and graphs for simplified interpretation and instant recognition of the device's operating status.

 

Commissioning in 3 steps

 

Remote management from anywhere

  Remote management from anywhere  

 

Communicable

Ethernet connectivity for complete management of the device, either locally or remotely, for access to the logs stored in the memory or for configuration and commissioning. Access to the web server is possible from any browser, either via mobile or PC.

Up to 7 years of log data stored in its 2 Gb memory, ready for access via integrated web server.

 

Remote management from anywhere

 

Everything you need for the most accurate compensation

 

Everything you need for the most accurate compensation

 

Download the catalogue

 

Available in three formats

 

Wall mounted

 

Cabinet IP20/41

 

Cabinet IP54

SVGm Wall mounted

 

SVGm Cabinet IP20/41

 

SVGm Cabinet IP54

30 kvar

60 kvar

100 kvar

 

100 kvar

200 kvar

300 kvar

400 kvar

 

100 kvar

200 kvar

300 kvar

400 kvar

More information

 

More information

 

More information

 

Where to install the SVGm Static Var Compensator?

 

Thanks to its features, SVGm is a versatile device that can be installed in a multitude of applications, both at industrial level and in the service or infrastructure sector.

Industrial ovens, welding devices, electric motors with frequency inverters, telecommunications infrastructures, hospitals or airports (lifts and stairways), data centres, paper industry, electric generators ...

 

Where to install the SVGm Static Var Compensator?

CIRCUTOR 2021 Meeting Point

Raption 100. The perfect combination of power, versatility and elegance

on .

A compact charger capable of providing up to 100 kW DC, enough to charge the electric vehicles of yesterday, today and tomorrow.

 

In an era of constant innovation and development by electric vehicle manufacturers, there is an increasing number of cars with higher capacity batteries, and thus longer ranges. In addition, more and more vehicles are integrating drivelines that double the voltage of their predecessors, going from the 400V of the first models to the 800V of the most recent electric cars. At Circutor, we are at the forefront of charging solutions, which is why we are presenting the Raption 100, a compact, high-power charger that can recharge the electric vehicles of yesterday, today and tomorrow.

What is the Raption 100?

 

The Raption 100 is a charger with a DC power of up to 100 kW, capable of charging using both the COMBO CCS and CHAdeMO standards. It also features an extra hose for simultaneously charging a second car with up to 22 kW of AC power.

The Raption series is an established range of products in the realm of fast, public charging stations. It started out with the Raption 22 model in 2016, which has since evolved by applying the experience gained to add improvements and adapt to the needs of the current and future market. This device evolved directly from Raption 50, a device with more than 3 years of market experience and over 1000 units sold in 2019. The Raption 100 maintains the enclosure and all the strong points of the Raption 50, while doubling its charging power.

Raption 100. 100 kW charger for electric vehicles

 

Highlights of the Raption 100

Usability

 

Maintains the easy and intuitive charging experience of its predecessor with an 8-inch touchscreen, with 27 languages to choose from, courtesy light and the option to add an integrated contactless card payment system.

Reliability

 

The modular architecture of Raption devices allows them to stay in service even if a problem occurs in a module, since the charger automatically disconnects it and uses the remaining ones. This increases their availability and ensures that drivers won't be stranded and unable to recharge.

Safety

 

The Raption 100 also maintains the connector lock, preventing vandalism by making it impossible to release the connector unless the user is authenticated. In addition, the devices with 5-metre cables will feature a floating cable design for easier handling that avoids contact with the ground. This prevents potential damage, enhances safety and reduces maintenance costs.

Customisation

 

Both the enclosure and the Raption 100 screen are 100% customisable, allowing the device to be fully covered in vinyl showing images of the brand, or to show advertising on the touch display screensaver.

Master/Slave System

 

The Raption 100 can be used as a master in multipoint installations, combining DC and AC charging, a solution that, in addition to minimising the initial investment and maintenance costs when several chargers are needed, can yield considerable energy savings, since the master unit distributes the available power by taking into account the number of charging points in use.

All of this makes the Raption 100 the perfect charger to install on public roads, restaurants, petrol stations, shopping centres, airports and interurban areas. These are settings where drivers appreciate the ability to do quick charges lasting no more than 20 minutes, which, given the characteristics of new EVs, can provide a range of more than 200 km.

 


 

More information: Outdoor fast charging station Raption 100

 

Discover the new CVM-E3-MINI-WiEth

on .

Easier than ever, now with Wi-Fi and Bluetooth.

Easier than ever, now with Wi-Fi and Bluetooth.

 

The CVM-E3-MINI-WiEth power analyzer lets you gather information on the energy consumption and electrical parameters of your installation quickly and easily. It has Ethernet and Wi-Fi communications that provide real-time information to the Energy Management System (EMS), without having to install wiring for communications.

Its Bluetooth connectivity can be used to set up communications parameters (Ethernet or Wi-Fi) through the free MyConfig app on your mobile or tablet, without having to physically access the device.

“Connect it to your LAN and configure its communications from your own smartphone or tablet to start managing electrical variables and energy consumption of your installation.”


You don’t need anything else

Wi-Fi connection
Wi-Fi connection

Connect the analyzer to your Wi-Fi network and start registering all your consumptions and electrical parameters from your installation. Check the Wi-Fi coverage and assigned IP address directly from its display.

Conexión Wi-Fi

Manage your installation wirelessly.

Ethernet connection
Ethernet connection

Connect the analyzer to your Wi-Fi network and start registering all your consumptions and electrical parameters from your installation. Quickly check the device IP and MAC address by its display any time.

Conexión Ethernet

Connect the analyzer to the local network and start measuring.

Bluetooth connection
Bluetooth connection

Use Bluetooth connectivity to program Ethernet or Wi-Fi communications without the need for a computer.

With the free MyConfig app, you can set up the communications on your power analyzer quickly and easily.

Conexión por Bluetooth

Easily set up Bluetooth communications

 Easily set up Bluetooth communications


Manage your energy consumption and electrical parameters

The CVM-E3-MINI-WiEth Power Analyzer lets you know the consumption of active, reactive inductive, reactive capacitive and apparent energy as well as record and display the cost of energy, CO2 emissions and operating hours for preventive maintenance. The device has measurement in 4 quadrants so it also accumulates these same variables in energy generation.

Install it in panels to verify the quality of consumption of your installation, since in addition to electrical variables such as voltage, current, power and power factor (monitors more than 250 variables) you can also check the distortion caused by the harmonics present in your installation both at a total level through the THD% and checking each harmonic individually up to 31º in voltage and current.

 

 

  • Up to 250 electrical parameters (RMS, maximum and minimum)
  • Consumed and generated energies
  • IP address and Wi-Fi coverage level on display
  • Website and free app to set up communications

Manage your energy consumption and electrical parameters


Configure your communications in any situation

The flexibility of the CVM-E3-MINI-WiEth analyzer allows you to set up your communications quickly, safely and easily. You can do this in the following ways:

  • By Bluetooth using the MyConfig app.
    You don't need to carry a computer to the facility to set the IP address and leave the analyzer connected to the LAN.

  • By web page via Wi-Fi or Ethernet.
    Connect to the analyzer through a web server and easily configure all its parameters from your own computer if you are connected to the same LAN. Use any browser to program its IP and other communication settings.

  • By using its display
    Programs the communications of the device directly through its display. Once configured you can check the IP and parameters set as well as the level of Wi-Fi coverage if you are connecting wirelessly.


Discover how it works


Remotely solves wiring errors

Solve any error in the programming or physical wiring of the analyzer through the PowerStudio software. Saves on indirect costs in commissioning and configuration.

Voltage & current phase connection error

Voltage & current phase connection error

The voltage wiring must correspond to the current wiring of the same phase. If this does not happen, it means that the installation has been performed incorrectly. This will cause values such as power, cos phi, PF or energies to be incorrect.

Error installing current sensors

Error installing current sensors

The installation of the current transformers must be correct, following the flow direction of the load. If a transformer is installed reversed, the current will be displayed as generated current instead of consumed or vice versa, having an error in the total energy register.

“Solve any problem remotely from the PowerStudio software, avoiding trips to the installation and the associated cost.”


Compatible with all kind of transformers

Compatible with all kind of transformers


More information

Download the catalogue

When do I have to use type-B residual current protection in my installation?

on .

We would like to inform you about current regulations and all the key aspects that you need to take into account for the correct selection of the type of residual current device to be installed. The evolution of electronics in electrical installations means that we need to know what type of residual current device protection is ideal for each type of load, in order to correctly protect both people and the installation itself.
This is why we present our new type B residual current protection family, which is the required protection when there may be a leakage of alternating, pulsating or direct current. Find out why you should use type-B residual current protection devices and what benefits they bring to your installation.

Discover all the benefits of type-B residual current protection and when it has to be installed.

 

 

Protect your installation the right way

Avoid risks by selecting the right protection for each type of load

 

Type-A and AC residual current protection devices do not detect DC residual currents and can trip spuriously or lock up, jeopardizing service continuity and putting the installation and/or personnel at serious risk

 

Type-A Residual current protection

The protection required by the manufacturers themselves

 

Manufacturers of devices with power electronics, including variable-speed drives, UPS, EV charging points, etc., require type-B residual current devices to be installed to ensure their loads are properly protected.

 

Type-A Residual current protection

Discover all the benefits of type-B residual current protection and when it has to be installed.

 

 

Technology to serve users

 

On RGU-100B and CBS-400B devices, the screen changes to red when a trip occurs, storing the total leakage value. This value is broken down to show both the AC and DC component of the leak. This features offers relevant information to let the user pinpoint the exact location of the leak.

 

 
Type-B Residual current protection 

 

Technical article

 

Find out why you should protect your installation using type-B devices

 

 

Type-B residual current protection solutions

 

Guarantee the maximum service continuity of your installation and provide complete protection to people and property by installing type-B residual current protection.

 

Indirect connection devices

 

RGU-100B

Type-B residual current protection and monitoring relay

 

CBS-400B

Type-B monitoring and protection relay with 4 channels

 

RGU-10B

Residual current protection and monitoring electronic relay

RGU-100B

 

CBS-400B

 

RGU-10B

More information

 

More information

 

More information

 

 

Devices with built-in transformer

 

 

 

+ automatic reclosing

IDB-4

Class-B RCCB, instantaneous 30 and 300 mA

 

WGB-35-TB

Transformer with built-in class-B residual current relay

 

RECB

Self-reclosing type-B RCCB

IDB-4

 

WGB-35-TB

 

RECB

More information

 

More information

 

More information

 

 

What are the advantages of WGB transformers?

 

Connecting the WGB earth leakage transformers to the (RGU-100B or CBS-400B) relay is Plug & Play: it's a quick and easy process that uses an RJ-45 connector. No need for additional power or cabling. Additionally, the transformers have an accessory for convenient installation on a DIN rail.

 What are the advantages of WGB transformers?

 

More information

 

 

Where should type-B protection be installed?

Where should type-B protection be installed?

CIRCUTOR 2021 Meeting Point

CIRCUTOR · 2021 · Meeting Point

on .

2021 will be a great year for our sector

Visit us on January 21, from 9 a.m. to 8 p.m., at CIRCUTOR · 2021 · Meeting Point.
A virtual meeting point, where you can learn more about all the challenges and objectives of the electrical sector, for this new year 2021.

Learn more about the challenges and objectives of the electricity sector for 2021

 

Challenges and objectives that we want to share with you, because it is in our hands that we remember 2021 as a great year for our sector.

Choose your Avatar and participate in our virtual event, with 6 training rooms, 6 Showrooms, 5 practical workshops and 1 innovation master conference.

Do not miss the challenges for 2021 in: Electric Mobility, Power Quality, Energy Efficiency and Renewable Energies.

Get your ticket to access the
CIRCUTOR ·
2021 · Meeting Point

 

Register and reserve your place.

 

(We recommend registering as soon as possible,
to avoid waiting the same day of the event)

Master Conference

 

   "Innovation and technology in the new age"        
         
  Xavier Ferràs. CIRCUTOR 2021 Meeting Point  

Xavier Ferràs. Expert in Innovation and Tecnology.

Passionate for the technology and innovation, will explain us about the importance of innovation and technology as a force for progress in our companies.


Time: 12:00 h (Time in Spain. Central European Time (CET))
Hall: Amphitheater (Limited capacity by strict order of arrival)

 

Workshops

 

  Workshop (Duration 1 hour)   Time (*)   Hall  
             
  Smart Electric Vehicle Chargig System. Indoor and outdoor aplications   09:30 h   Electric Mobility  
  Photovoltaic Solutions. Canopies and structures for Photovoltaic modules   09:30 h   Renewable Energies  
  Harmonics problems and solutions. Improving your electrical systems   15:00 h   Power Quality  
  Why should I protect my installation with TYPE B residual current protection?   15:00 h   Continuity Service  
  How easy is to install a EMSi ( Integral Energy Management System)   15:00 h   Energy Efficiency  

 

(*) (Time in Spain. Central European Time (CET))
Limited capacity by strict order of arrival

 

 
 


Get your ticket to access the

CIRCUTOR · 2021 · Meeting Point

 

Register and reserve your place.

 
 

 

(We recommend registering as soon as possible,
to avoid waiting the same day of the event)

 
     
 

Line. Energy Efficiency is as easy as that!

on .

Integral Energy Management System

Integral Energy Management System

ENERGY MANAGEMENT + INSTALLATION CONTROL + MAINTENANCE

It has never been easier

Total flexibility for any installation

Total flexibility for any installation

The Line devices which are part of the integral Energy Management System (EMSi) offers multiple combinations, allowing you to create a solution custom-made for each installation.

Easy installation

Easy installation

The modular design of the system allows any associated Line device to be installed quickly, securely and automatically thanks to its integrated Bus-Line communications.

Discover the new EMSi system

Discover the new EMSi system

Control and manage your installation: EMSi

The devices in the Line system paved the way for the EMSi concept, which combines the management of different types of energy consumption and the management of multiple control and maintenance systems (lighting, HVAC, etc.) into a single solution.

 

ENERGY MANAGEMENT + INSTALLATION CONTROL + MAINTENANCE

 

Energy management
Management of all your consumption

The EMSi system records all the information on your installation's energy consumption, which it can monitor in real time, display it on graphs, compare data from different periods or display it in data tables so it can be exported outside the application.

The data acquisition is very simple; using the line-EDS device, you can add any meter with Modbus communications to the EMSi system; the Line-M devices with digital inputs let you record consumption using any meter with a pulse output. The electricity consumption is recorded using the Line-CVM-D32 analyzer.

Management of all your consumption

The EMSi software integrated into line-EDS lets you create SCADA displays to show, in real time, where, how, when and how much energy your installation is consuming. This information lets you save on costs and manage the installation globally based on the ISO 50001 standard.

Find out how and where you consume energy.
Find out how and where you consume energy.

Monitor every circuit in your installation
Monitor every circuit in your installation

installation control
Monitor any type of installation

Install Line-EDS and integrate any Modbus RTU or Modbus TCP device that is present in your installation (temperature, humidity, pressure, level or other kind of probe).

Create SCADA screens to control all your automation systems from a single device (Line-EDS). You can use any web browser or PowerStudio Server to control and display the status of your installation in real time, change any setpoint and receive alarms to improve the management of all your control systems.

Easily and dynamically display any regulation system required, such as:

Lighting control

Configure setpoints to automatically turn lights on and off, on a set schedule or by using the astronomical clock feature. It also offers the option to control lighting systems by creating a work schedule, with or without inputs from motion sensors.

Lighting control

Example of lighting control
Example of lighting control

HVAC control

Take external temperature readings, compare them with the setpoint and turn on the HVAC system to drive and monitor the hot water loop. Monitor the condition of the compressors to display the percent load on each and verify they are working correctly.

Example of HVAC control
Example of HVAC control

Temperature control

Check the status of each HVAC unit and adjust the hot/cold setpoints as needed. Create calendars or schedules to program automatic on/ off switching times. Each device can be set based on the schedule or workday, with the option to incorporate motion sensors into the control system.

Example of temperature control
Example of temperature control

Note: The sample screens shown are not set up by default on Line-EDS devices. Each user will be able to generate their own screens based on their needs.

Maintenance of any installation
Maintenance of any installation

Program any type of alarm to monitor the installation depending on the variables of the connected devices. If any parameter is outside its programmed values, the system will adjust the installation and/or send an e-mail instantly.

Maintenance of any installation

It combines every aspect of energy control into a single tool, providing invoice simulations based on the energy consumption of any meter.

Know what the utility will bill in advance and schedule an automatic notification to compare and improve the efficiency of your consumption.

Maintenance of any installation

Maintenance of any installation

Create Energy Performance Indicators (EnPI) to chack if energy improvement actions are working correctly. Create your own KPI, depending on your installation and processes.

  

  

Typical performance indicators:

Typical performance indicators:

Two models, four types of management.

With the Line system devices, you decide how to manage any installation. Manage them using IoT cloud platforms or with our integral Energy Management System, working locally or remotely.

Monitoring system using
Line-EDS-Cloud

Monitoring system using Line-EDS-Cloud

System features:

  • Compatible with the major IoT platforms for Big Data analysis.
  • Distributed system, allowing data from multiple installations to be centralized in the same system.
  • Connect from anywhere with internet access.
  • Does not require installing and maintaining a local server.
  • No programming specialists required.
 

Examples of IoT platforms

Azure platform
Azure platform

AWS platform
AWS platform

Monitoring and control system using Line-EDS-PS

Monitoring and control system
using Line-EDS-PS

EMSi (Integral Energy Management System)

Manage consumption + Installation control + Maintenance

System features:

  • Line-EDS-PS incorporates EMSi software for the integral management of installations.
  • Access EMSi from any web browser, whether in local or remote mode.
  • Does not require installing and maintaining a local server.
  • Generic Modbus driver to add any device on the market.
  • Internal memory for data analysis and traceability using graphs and tables.
  • Energy consumption management.
  • Automatic control of installations.
  • Alarms and billing simulation for proper maintenance.

Accessible via Webserver or PowerStudio

Accessible via Webserver or PowerStudio

Monitoring and control system using
Line-EDS + PowerStudio

Monitoring and control system using
Line-EDS + PowerStudio

System features:

  • Manage your installation from your own server (PowerStudio Server).
  • Add as many devices as you want with PowerStudio Server.
  • Access EMSi from any web browser, whether in local or remote mode.
  • Redundant database through the installation of Line-EDS-PS devices.
  • No limit on memory for data analysis and traceability using graphs and tables.

Features of the monitoring and control system using Line-EDS-PS

System monitoring and control using PowerStudio

System monitoring and control using PowerStudio

System features:

  • Create your Line solution using as many devices as you need, and expand it at any time.
  • Manage your installation from your own server (PowerStudio software).
  • Access EMSi from any web browser, whether in local or remote mode.
  • Add as many devices to your communications network as you want with PowerStudio.
  • No limit on memory for data analysis and traceability using graphs and tables.

Discover the 4 types of management in this webinar

Discover the 4 types of management in this webinar


Line system devices

Complete modular system for energy management

Line-M-3G

Line-EDS

Line-CVM

Line-M-4IO

Line-M-20I

Line-TCPRS1

Line-M-EXT-PS

Line-M-3G

Modem for 3G communications

Line-EDS

Datalogger with integrated Webserver


Line-EDS-Cloud
Line-EDS-PS
Line-EDS-PSS
Line-EDS-PSS-PRO

Line-CVM

Power analyzer


Line-CVM-D32

Line-M-4IO

Input/output modules


Line-M-4IO-T
Line-M-4IO-R
Line-M-4IO-RV
Line-M-4IO-A

Line-M-20I

Module with 20 digital inputs

Line-M-20I

Line-TCPRS1

RS-485 to Ethernet/Wi-Fi converter

Line-M-EXT-PS

Power supply

 

Discover more about the first and unique EMSi of the market

Download the catalogue
LINE. integral Energy Management System, is that easy as that!

 

 Download the datasheets 

More Articles ...

  logo-australia-naw  

NAW CONTROLS

98 Commercial Drive
Thomastown VIC 3074
PO Box 1169, Bundoora, LPO VIC 3083

Telephone: 03 9464 6555
Email: sales@nawcontrols.com.au
www.nawcontrols.com.au

 
  logo-australia-quality-energy  

QUALITY ENERGY

27 Roberna Street,
Moorabbin VIC 3189

Telephone: 1800 736 374
Email: sales@qualityenergy.com.au
www.qualityenergy.com.au

 

circutor32x32

Contact

CIRCUTOR, SA
Vial Sant Jordi s/n, 08232
Viladecavalls (Barcelona) Spain
Tel: (+34) 93 745 29 00
Fax (+34) 93 745 29 14

Technical Support

Tel. (+34) 93 745 29 19

Laboratory

Testing and Calibration

© 2015 circutor.com. All rights reserved.